1) Unroll the board
2) Open valve cover
3) Turn valve counter-clockwise to completely open
4) Attach hose to air pump
5) Attach hose to valve on board – turn clockwise until it tightens
6) Close valve on airpump
7) Inflate to 15 psi (or otherwise indicated pressure depending on your board). Stop around 1-2 psi under desired pressure, then remove (open) valve on air pump to make the final stage of pumping easier.
8) Remove hose from board and attach valve cover
9) Flip board over and attach fin.
10) Attach leash to ankle and board